couleurs en 16bit
Dernière réponse : dans Le monde de Linux
bonjour a tous,
voila je débute sous linux et j'ai un petit probleme, comme marqué dans le titre du sujet mes couleurs sont en 16bit et non 24 !! ce qui donne des couleurs fade et des dégradé pas trés agréables .... je ne vois pas d'ou sa vien j'ai bataillé pour installer linux a cause de la carte graphique (X800 GT) car il me proposé le mauvais driver. J'espere que vous pourrez donner une réponse a ma question.
bye
voila je débute sous linux et j'ai un petit probleme, comme marqué dans le titre du sujet mes couleurs sont en 16bit et non 24 !! ce qui donne des couleurs fade et des dégradé pas trés agréables .... je ne vois pas d'ou sa vien j'ai bataillé pour installer linux a cause de la carte graphique (X800 GT) car il me proposé le mauvais driver. J'espere que vous pourrez donner une réponse a ma question.
bye
Autres pages sur : couleurs 16bit
Lassé par la pub ? Créez un compte
voici le fichier :
# File generated by XFdrake.
# **********************************************************************
# Refer to the XF86Config man page for details about the format of
# this file.
# **********************************************************************
Section "Files"
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Mandrake 6.0 and later now use a font server independent of
# the X server to render fonts.
FontPath "unix/:-1"
EndSection
Section "ServerFlags"
#DontZap # disable <Crtl><Alt><BS> (server abort)
#DontZoom # disable <Crtl><Alt><KP_+>/<KP_-> (resolution switching)
AllowMouseOpenFail # allows the server to start up even if the mouse does not work
EndSection
Section "Module"
Load "dbe" # Double-Buffering Extension
Load "v4l" # Video for Linux
Load "extmod"
Load "type1"
Load "freetype"
EndSection
Section "InputDevice"
Identifier "Keyboard1"
Driver "keyboard"
Option "XkbModel" "pc102"
Option "XkbLayout" "fr"
Option "XkbOptions" "compose:rwin"
EndSection
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "ExplorerPS/2"
Option "Device" "/dev/mouse"
Option "ZAxisMapping" "6 7"
EndSection
Section "Monitor"
Identifier "monitor1"
VendorName "Generic"
ModelName "1280x1024 @ 60 Hz"
HorizSync 31.5-64.3
VertRefresh 50-70
# Monitor preferred modeline (60.0 Hz vsync, 64.0 kHz hsync, ratio 5/4)
ModeLine "1280x1024" 108 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
# TV fullscreen mode or DVD fullscreen output.
# 768x576 @ 79 Hz, 50 kHz hsync
ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630
# 768x576 @ 100 Hz, 61.6 kHz hsync
ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616
EndSection
Section "Device"
Identifier "device1"
BoardName "ATI Radeon (fbdev)"
Driver "fbdev"
Option "DPMS"
EndSection
Section "Screen"
Identifier "screen1"
Device "device1"
Monitor "monitor1"
DefaultColorDepth 16
Subsection "Display"
Depth 8
Virtual 1280 1024
EndSubsection
Subsection "Display"
Depth 15
Virtual 1280 1024
EndSubsection
Subsection "Display"
Depth 16
Virtual 1280 1024
EndSubsection
Subsection "Display"
Depth 24
Virtual 1280 1024
EndSubsection
EndSection
Section "ServerLayout"
Identifier "layout1"
InputDevice "Keyboard1" "CoreKeyboard"
InputDevice "Mouse1" "CorePointer"
Screen "screen1"
EndSection
alors j'ai modifié le DefaultColorDepth 16 en 24 a la surprise d'une joie multicoloré n'importe commen en gro sa affiché n'importe koi a dominance violet et je me suis un peu embété pour remetre en 16
# File generated by XFdrake.
# **********************************************************************
# Refer to the XF86Config man page for details about the format of
# this file.
# **********************************************************************
Section "Files"
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Mandrake 6.0 and later now use a font server independent of
# the X server to render fonts.
FontPath "unix/:-1"
EndSection
Section "ServerFlags"
#DontZap # disable <Crtl><Alt><BS> (server abort)
#DontZoom # disable <Crtl><Alt><KP_+>/<KP_-> (resolution switching)
AllowMouseOpenFail # allows the server to start up even if the mouse does not work
EndSection
Section "Module"
Load "dbe" # Double-Buffering Extension
Load "v4l" # Video for Linux
Load "extmod"
Load "type1"
Load "freetype"
EndSection
Section "InputDevice"
Identifier "Keyboard1"
Driver "keyboard"
Option "XkbModel" "pc102"
Option "XkbLayout" "fr"
Option "XkbOptions" "compose:rwin"
EndSection
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "ExplorerPS/2"
Option "Device" "/dev/mouse"
Option "ZAxisMapping" "6 7"
EndSection
Section "Monitor"
Identifier "monitor1"
VendorName "Generic"
ModelName "1280x1024 @ 60 Hz"
HorizSync 31.5-64.3
VertRefresh 50-70
# Monitor preferred modeline (60.0 Hz vsync, 64.0 kHz hsync, ratio 5/4)
ModeLine "1280x1024" 108 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
# TV fullscreen mode or DVD fullscreen output.
# 768x576 @ 79 Hz, 50 kHz hsync
ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630
# 768x576 @ 100 Hz, 61.6 kHz hsync
ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616
EndSection
Section "Device"
Identifier "device1"
BoardName "ATI Radeon (fbdev)"
Driver "fbdev"
Option "DPMS"
EndSection
Section "Screen"
Identifier "screen1"
Device "device1"
Monitor "monitor1"
DefaultColorDepth 16
Subsection "Display"
Depth 8
Virtual 1280 1024
EndSubsection
Subsection "Display"
Depth 15
Virtual 1280 1024
EndSubsection
Subsection "Display"
Depth 16
Virtual 1280 1024
EndSubsection
Subsection "Display"
Depth 24
Virtual 1280 1024
EndSubsection
EndSection
Section "ServerLayout"
Identifier "layout1"
InputDevice "Keyboard1" "CoreKeyboard"
InputDevice "Mouse1" "CorePointer"
Screen "screen1"
EndSection
alors j'ai modifié le DefaultColorDepth 16 en 24 a la surprise d'une joie multicoloré n'importe commen en gro sa affiché n'importe koi a dominance violet et je me suis un peu embété pour remetre en 16
j'utilise vesa pour freevo et la tv,
mais si c'est sur un poste "standard", t'as essayé le driver "ati" ?
sinon un tuto pour ubuntu qui pourrait t'aiguiller. http://wiki.ubuntu-fr.org/materiel/ati
mais si c'est sur un poste "standard", t'as essayé le driver "ati" ?
sinon un tuto pour ubuntu qui pourrait t'aiguiller. http://wiki.ubuntu-fr.org/materiel/ati
Lassé par la pub ? Créez un compte
- Contenus similaires :
Tags :