Ecran noir au changement de console (ati propriétaires/Edgy)

Il y a 472 utilisateurs connus et inconnus. Pour voir la liste des connectés connus, cliquez ici

Voir les posts : Par défaut Tous Les bonnes notes Les notes insuffisantes

Mot : Pseudo : Filtrer
Bas de page
Auteur	Sujet : Ecran noir au changement de console (ati propriétaires/Edgy)

PauseKawa

Plus d'informations

08-04-2007 à 09:00:46

Bonjour a tous,

Après l'installation des pilotes propriétaires je me suis rendu compte que si je change de console (CTRL ATL Fx) et que je reviens a X j'ai un écran noir et la rien a faire (changement de console etc) mon ordi reste sur un écran noir.

Mes connaissances sont faibles sur le sujet mais voici quelques détails qui me 'genent'

xorg.conf

Code :

Section "Monitor"
Identifier "Acer AL1914"
Option "DPMS"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "ATI Technologies, Inc. RV280 [Radeon 9200]"
Driver "ati"
BusID "PCI:1:0:0"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]"
Driver "fglrx"
Option "VideoOverlay" "on"
Option "OpenGLOverlay" "off"
EndSection

Mais bon :

Code :

fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9250/9200 Series DDR Generic
OpenGL version string: 1.3.1091 (X4.3.0-8.28.8)

Code :

fgl_glxgears
Using GLX_SGIX_pbuffer
588 frames in 5.0 seconds = 117.600 FPS
630 frames in 5.0 seconds = 126.000 FPS
565 frames in 5.0 seconds = 113.000 FPS
X Error of failed request: BadDrawable (invalid Pixmap or Window parameter)
Major opcode of failed request: 14 (X_GetGeometry)
Resource id in failed request: 0x0
Serial number of failed request: 61
Current serial number in output stream: 61

Code :

glxgears -printfps
5043 frames in 5.0 seconds = 1004.987 FPS
5008 frames in 5.0 seconds = 997.562 FPS
5035 frames in 5.0 seconds = 1003.526 FPS
5079 frames in 5.0 seconds = 1015.796 FPS
5047 frames in 5.0 seconds = 1009.216 FPS

Code :

glxinfo | grep rendering
direct rendering: Yes

Code :

fireglcontrol
X Error: BadDevice, invalid or uninitialized input device 168
Major opcode: 148
Minor opcode: 3
Resource id: 0x0
Failed to open device
X Error: BadDevice, invalid or uninitialized input device 168
Major opcode: 148
Minor opcode: 3
Resource id: 0x0
Failed to open device

(Mais le panneau de controle s'ouvre quand même)

Et le log donne cela

Code :

(WW) The directory "/usr/share/X11/fonts/misc" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/X11/fonts/cyrillic" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/X11/fonts/100dpi/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/X11/fonts/75dpi/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/X11/fonts/Type1" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/X11/fonts/100dpi" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/X11/fonts/75dpi" does not exist.
Entry deleted from font path.
(WW) `fonts.dir' not found (or not valid) in "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType".
Entry deleted from font path.
(Run 'mkfontdir' on "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" ).
----
(WW) fglrx: No matching Device section for instance (BusID PCI:1:0:1) found
----
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(WW) fglrx(0): Option "VendorName" is not used
(WW) fglrx(0): Option "ModelName" is not used
----
(EE) AIGLX error: dlsym for __driCreateNewScreen_20050727 failed (/usr/lib/dri/atiogl_a_dri.so: undefined symbol: __driCreateNewScreen_20050727)
(EE) AIGLX: reverting to software rendering
----
error opening security policy file /usr/lib/xserver/SecurityPolicy
----
Could not init font path element /usr/share/fonts/X11/TTF/, removing from list!
Could not init font path element /usr/share/fonts/X11/OTF, removing from list!
Could not init font path element /usr/share/fonts/X11/CID/, removing from list!
xkb_types { include "%" };
xkb_compatibility { include "%" };
xkb_symbols { include "%" };
xkb_geometry { include "%" };
(EE) Error loading keymap /var/lib/xkb/server-0.xkm
xkb_types { include "%" };
xkb_compatibility { include "%" };
xkb_symbols { include "%" };
xkb_geometry { include "%" };
(EE) Error loading keymap /var/lib/xkb/server-0.xkm

Donc si vous avez une idée pour m'aider.

Merci d'avance.

Aller à :

FORUM Tom's Hardware » Le monde de Linux » A l'aide ! » Ecran noir au changement de console (ati propriétaires/Edgy)

Page générée en 0.288 secondes