installer clés usb sur Mandriva 2005

Salut,

J'ai installé linux Mandriva 2005. j'ai un hub usb sur mon ordinateur, la souris et la clés sont installés sur le hub. ma souris fonctionne mais je n'arrive pas à utiliser ma clés. est-il possible que la souris soit monté et pas la clés?
j'ai fait > dmesg . voici le resultat, est ce que un pro peut-il me dire ou est monté ma clés usb?
merci.

Linux version 2.6.11-6mdksmp (gb@n2.mandrakesoft.com) (gcc version 3.4.3 (Mandrakelinux 10.2 3.4.3-3mdk)) #1 SMP Tue Mar 22 15:40:42 CET 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000def0000 (usable)
BIOS-e820: 000000000def0000 - 000000000defc000 (ACPI data)
BIOS-e820: 000000000defc000 - 000000000df00000 (ACPI NVS)
BIOS-e820: 000000000df00000 - 000000000e000000 (usable)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
224MB LOWMEM available.
found SMP MP-table at 000f6ce0
NX (Execute Disable) protection: active
On node 0 totalpages: 57344
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 53248 pages, LIFO batch:13
HighMem zone: 0 pages, LIFO batch:1
DMI present.
ACPI: RSDP (v000 PTLTD ) @ 0x000f6c70
ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x0def7c02
ACPI: FADT (v001 INTEL 440BX 0x06040000 PTL 0x000f4240) @ 0x0defbf14
ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0x0defbf88
ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x0defbfd8
ACPI: DSDT (v001 PTLTD Custom 0x06040000 MSFT 0x0100000d) @ 0x00000000
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:4 APIC version 17
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Using ACPI for processor (LAPIC) configuration information
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: INTEL Product ID: 440BX APIC at: 0xFEE00000
I/O APIC #1 Version 17 at 0xFEC00000.
Enabling APIC mode: Flat. Using 1 I/O APICs
Processors: 1
Allocating PCI resources starting at 0e000000 (gap: 0e000000:f0c00000)
Built 1 zonelists
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Initializing CPU#0
Kernel command line: auto BOOT_IMAGE=linux ro root=301 acpi=ht resume=/dev/hda5splash=silent
bootsplash: silent mode.
PID hash table entries: 1024 (order: 10, 16384 bytes)
Detected 1546.492 MHz processor.
Using pmtmr for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 222540k/229376k available (2382k kernel code, 6260k reserved, 681k data, 296k init, 0k highmem, 0k BadRAM)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 3022.84 BogoMIPS (lpj=1511424)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 078bfbff c1d3fbff 00000000 00000000 0000000000000000 00000000
CPU: After vendor identify, caps: 078bfbff c1d3fbff 00000000 00000000 00000000 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU: After all inits, caps: 078bfbff c1d3fbff 00000000 00000010 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
CPU0: AMD Athlon(tm) 64 Processor 3200+ stepping 0a
per-CPU timeslice cutoff: 2926.16 usecs.
task migration cache decay timeout: 3 msecs.
Total of 1 processors activated (3022.84 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=2 pin2=0
Brought up 1 CPUs
CPU0 attaching sched-domain:
domain 0: span 01
groups: 01
domain 1: span 01
groups: 01
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 222k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfd9a0, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20050211
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
PnPBIOS: Disabled
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router PIIX/ICH [8086/7110] at 0000:00:07.0
PCI->APIC IRQ transform: 0000:00:07.2[D] -> IRQ 19
PCI->APIC IRQ transform: 0000:00:10.0[A] -> IRQ 17
PCI->APIC IRQ transform: 0000:00:11.0[A] -> IRQ 18
PCI->APIC IRQ transform: 0000:00:12.0[A] -> IRQ 19
PCI: Cannot allocate resource region 4 of device 0000:00:07.1
Simple Boot Flag at 0x36 set to 0x1
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
audit: initializing netlink socket (disabled)
audit(1115298777.050:0): initialized
inotify device minor=63
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
Limiting direct PCI/PCI transfers.
vesafb: framebuffer at 0xf0000000, mapped to 0xce880000, using 3750k, total 16384k
vesafb: mode is 800x600x16, linelength=1600, pages=0
vesafb: protected mode interface info at 00ff:44f0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
mtrr: your processor doesn't support write-combining
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 35024 bytes,<6>...found (800x600, 34976 bytes, v3).
Console: switching to colour frame buffer device 92x32
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
pktcdvd: v0.2.0a 2004-07-14 Jens Axboe (axboe@suse.de) and petero2@telia.com
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 0000:00:07.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1470-0x1477, BIOS settings: hda MA, hdb io
ide1: BM-DMA at 0x1478-0x147f, BIOS settings: hdc MA, hdd io
Probing IDE interface ide0...
hda: VMware Virtual IDE Hard Drive, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: VMware Virtual IDE CDROM Drive, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 20971520 sectors (10737 MB) w/32KiB Cache, CHS=22192/15/63, UDMA(33)
hda: cache flushes not supported
/dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 >
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
NET: Registered protocol family 1
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
devfs_mk_dev: could not append to parent for md/0
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: hda1: orphan cleanup on readonly fs
ext3_orphan_cleanup: deleting unreferenced inode 323487
ext3_orphan_cleanup: deleting unreferenced inode 32146
ext3_orphan_cleanup: deleting unreferenced inode 32142
EXT3-fs: hda1: 3 orphan inodes deleted
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 296k freed
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.2
uhci_hcd 0000:00:07.2: UHCI Host Controller
uhci_hcd 0000:00:07.2: irq 19, io base 0x1060
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
bootsplash: status on console 0 changed to on
EXT3 FS on hda1, internal journal
SCSI subsystem initialized
libata version 1.10 loaded.
scsi: ***** BusLogic SCSI Driver Version 2.1.16 of 18 July 2002 *****
scsi: Copyright 1995-1998 by Leonard N. Zubkoff <lnz@dandelion.com>
scsi0: Configuring BusLogic Model BT-958 PCI Wide Ultra SCSI Host Adapter
scsi0: Firmware Version: 5.07B, I/O Address: 0x1440, IRQ Channel: 17/Level
scsi0: PCI Bus: 0, Device: 16, Address: 0xEC800000, Host Adapter SCSI ID: 7
scsi0: Parity Checking: Enabled, Extended Translation: Enabled
scsi0: Synchronous Negotiation: Ultra, Wide Negotiation: Enabled
scsi0: Disconnect/Reconnect: Enabled, Tagged Queuing: Enabled
scsi0: Scatter/Gather Limit: 128 of 8192 segments, Mailboxes: 211
scsi0: Driver Queue Depth: 211, Host Adapter Queue Depth: 192
scsi0: Tagged Queue Depth: Automatic, Untagged Queue Depth: 3
scsi0: *** BusLogic BT-958 Initialized Successfully ***
scsi0 : BusLogic BT-958
Adding 1124508k swap on /dev/hda5. Priority:-1 extents:1
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected an Intel 440BX Chipset.
agpgart: Maximum main memory to use for agp memory: 177M
agpgart: AGP aperture is 64M @ 0xe8000000
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Supermount version 2.0.4 for kernel 2.6
loop: loaded (max 8 devices)
hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
pcnet32.c:v1.30i 06.28.2004 tsbogend@alpha.franken.de
pcnet32: PCnet/PCI II 79C970A at 0x1080, 00 0c 29 39 a4 b1 assigned IRQ 18.
eth0: registered as PCnet/PCI II 79C970A
pcnet32: 1 cards_found.
ip_conntrack version 2.1 (1792 buckets, 14336 max) - 252 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
NET: Registered protocol family 17
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (1792 buckets, 14336 max) - 252 bytes per conntrack
Bluetooth: Core ver 2.7
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.7
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM ver 1.5
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
NET: Registered protocol family 10
Disabled Privacy Extensions on device c03c77e0(lo)
IPv6 over IPv4 tunneling driver
Disabled Privacy Extensions on device cb062000(sit0)
mtrr: your processor doesn't support write-combining
Shorewall:net2all ROP:IN=eth0 OUT= MAC= SRC=192.168.11.130 DST=224.0.0.251 LEN=77 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=57
Shorewall:net2all ROP:IN=eth0 OUT= MAC= SRC=192.168.11.130 DST=224.0.0.251 LEN=77 TOS=0x00 PREC=0x00 TTL=255 ID=1 DF PROTO=UDP SPT=5353 DPT=5353 LEN=57
Shorewall:net2all ROP:IN=eth0 OUT= MAC= SRC=192.168.11.130 DST=224.0.0.251 LEN=77 TOS=0x00 PREC=0x00 TTL=255 ID=2 DF PROTO=UDP SPT=5353 DPT=5353 LEN=57
Shorewall:net2all ROP:IN=eth0 OUT= MAC= SRC=192.168.11.130 DST=224.0.0.251 LEN=112 TOS=0x00 PREC=0x00 TTL=255 ID=3 DF PROTO=UDP SPT=5353 DPT=5353 LEN=92
Shorewall:net2all ROP:IN=eth0 OUT= MAC= SRC=192.168.11.130 DST=224.0.0.251 LEN=112 TOS=0x00 PREC=0x00 TTL=255 ID=4 DF PROTO=UDP SPT=5353 DPT=5353 LEN=92
eth0: no IPv6 routers present
Shorewall:net2all ROP:IN=eth0 OUT= MAC= SRC=192.168.11.130 DST=224.0.0.251 LEN=112 TOS=0x00 PREC=0x00 TTL=255 ID=5 DF PROTO=UDP SPT=5353 DPT=5353 LEN=92
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Shorewall:net2all ROP:IN=eth0 OUT= MAC= SRC=192.168.11.130 DST=224.0.0.251 LEN=112 TOS=0x00 PREC=0x00 TTL=255 ID=6 DF PROTO=UDP SPT=5353 DPT=5353 LEN=92
Shorewall:net2all ROP:IN=eth0 OUT= MAC= SRC=192.168.11.130 DST=224.0.0.251 LEN=112 TOS=0x00 PREC=0x00 TTL=255 ID=7 DF PROTO=UDP SPT=5353 DPT=5353 LEN=92
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 10640 bytes, v3).
bootsplash: status on console 0 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 10640 bytes, v3).
bootsplash: status on console 1 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 10640 bytes, v3).
bootsplash: status on console 2 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 10640 bytes, v3).
bootsplash: status on console 3 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 10640 bytes, v3).
bootsplash: status on console 4 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 10640 bytes, v3).
bootsplash: status on console 5 changed to on
Shorewall:net2all ROP:IN=eth0 OUT= MAC= SRC=192.168.11.130 DST=224.0.0.251 LEN=112 TOS=0x00 PREC=0x00 TTL=255 ID=8 DF PROTO=UDP SPT=5353 DPT=5353 LEN=92
Shorewall:net2all ROP:IN=eth0 OUT= MAC= SRC=192.168.11.130 DST=224.0.0.251 LEN=112 TOS=0x00 PREC=0x00 TTL=255 ID=9 DF PROTO=UDP SPT=5353 DPT=5353 LEN=92
Shorewall:net2all ROP:IN=eth0 OUT= MAC= SRC=192.168.11.130 DST=224.0.0.251 LEN=112 TOS=0x00 PREC=0x00 TTL=255 ID=10 DF PROTO=UDP SPT=5353 DPT=5353 LEN=92