graveur nec 2100 ad dvdr/rw grave cd et pas dvd

tu as bien des DVD+R/RW ? car ce graveur avec le firmware de base ne supporte que les +R/RW, pas les -R/RW

quel est le probleme exactement ? message d'erreur ?

tout à fait mon ami
j'ai essayé de graver avec verbatim puis avec des max tous en +
j'a essayé direct avec dvd shrink puis avec nero
le graveur est bien visible mais dès qu'il doit commencer à graver il met une erreur sans abimer le disk

il me mets le message suivant
burn process failed at 4x ( 5 540 kb/s)
puis le log suivant (un peu long)
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 16:21:30
Nero API version: 6.6.0.6
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <_NEC DVD+RW ND-2100AD> Version: 1.28 - HA 0 TA 0 - 6.6.0.6
Adapter driver: <atapi> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI

=== Scsi-Device-Map ===
CdRomPeripheral : _NEC DVD+RW ND-2100AD atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST RW/DVD GCC-4481B atapi Port 0 ID 1 DMA: On
DiskPeripheral : Maxtor 6Y080M0 atapi Port 1 ID 0 DMA: On
DiskPeripheral : ST3160023AS atapi Port 2 ID 0 DMA: On

=== CDRom-Device-Map ===
_NEC DVD+RW ND-2100AD D: CDRom0
HL-DT-ST RW/DVD GCC-4481 E: CDRom1
LITE-ON DVDRW SOHW-812S H: CDRom2
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 767MB (785852kB)
Free physical memory: 363MB (371980kB)
Memory in use : 52 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

8.2.2005
NeroAPI
09:25:45 #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started

09:25:45 #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)

09:25:45 #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted

09:25:46 #4 Text 0 File Reader.cpp, Line 127
Reader running

09:25:46 #5 Text 0 File Writer.cpp, Line 122
Writer _NEC DVD+RW ND-2100AD running

09:25:46 #6 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

09:25:46 #7 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)

09:25:46 #8 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)

09:25:46 #9 Text 0 File Burncd.cpp, Line 3155
Turn on Disc-At-Once, using DVD media

09:26:15 #10 Text 0 File DlgWaitCD.cpp, Line 257
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286111 (508:01.36, 4465MB)

09:26:15 #11 Text 0 File DlgWaitCD.cpp, Line 269
Write in overburning mode: NO

09:26:15 #12 Text 0 File DlgWaitCD.cpp, Line 2311
Recorder: _NEC DVD+RW ND-2100AD, Media type: DVD+R

09:26:15 #13 Text 0 File DlgWaitCD.cpp, Line 431
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD+R/RW.)

09:26:15 #14 Text 0 File ThreadedTransferInterface.cpp, Line 829
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [_NEC DVD+RW ND-2100AD]
--------------------------------------------------------------

09:26:15 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1042
Prepare recorder [_NEC DVD+RW ND-2100AD] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286112 | lead-out | 1 | 0x41 | 0x00

09:26:15 #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started

09:26:15 #17 Text 0 File Burncd.cpp, Line 4042
Cache writing successful.

09:26:15 #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed

09:26:15 #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 4x (5 540 KB/s)

09:26:15 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2604
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

09:26:15 #21 SCSI -1066 File Cdrdrv.cpp, Line 1178
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x0CE10600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00

09:26:16 #22 Text 0 File DVDR.cpp, Line 5619
Drive: _NEC DVD+RW ND-2100AD
Book Type request [gen]: DVD-ROM, write to EEPROM
Changing the Book Type was finished successfully, return code 0

09:26:16 #23 CDR -1211 File DVDR.cpp, Line 4796
Book Type set to: DVD-ROM

09:26:16 #24 Text 0 File DVDPlusRW.cpp, Line 615
Start write address at LBA 0
DVD high compatibility mode: Yes

09:26:28 #25 SCSI -1106 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x09FE0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x73 0x03

09:26:28 #26 CDR -1106 File Writer.cpp, Line 311
Power calibration error

09:26:29 #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

09:26:29 #28 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

09:26:29 #29 Phase 127 File APIProgress.cpp, Line 276
Generating DVD high compatibility borders

09:26:29 #30 Phase 129 File APIProgress.cpp, Line 276
Generating DVD borders completed successfully

09:26:30 #31 Text 0 File DVDR.cpp, Line 5619
Drive: _NEC DVD+RW ND-2100AD
Book Type request [gen]: DVD+R, write to EEPROM
Changing the Book Type was finished successfully, return code 0

09:26:30 #32 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 4x (5 540 KB/s)

09:26:30 #33 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.

09:26:30 #34 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.


Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 17/08/2001 16:07:32
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 07/05/2004 16:01:14 (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

mettre a jour le firmware, peut-etre

essayer un autre logiciel

essayer une autre marque de dvd (si tu savais le nombre de conflits graveurs/dvd existants)

je suis aller sur le site nec pour mettre à jour j'ai télécharger "ND2100Aver192" pour mettre à jour je l'ai installé et si je me réfère à mon anglais j'ai une fenetre qui me dit "this error can occur if the firmware does not meet the update requirements" qui semble confirmer que mon firmware est à jour

 


salut il y a quelque jours jai eu un probleme avec mon graveur nec......

et j'avais vu ton message et je me suis dit que je n'etait pas seul

et j'ai trouver la solution . quand je gravais avec nero meme 600.16 ca marquait power calibration error et j'ai essayé plein de logiciel et aujourd'hui ca fonctionne avec clonedvd2 en espérant que cela te rendra service..............minera99

tu avais essayé de mettre a jour ta version de néro ? car la 6.0.0.16 est vraiment tres vieille ...

g un probleme similaire...
j'arrive àgraver des cd mais pas les dvd...

1A21-0009-4030-2295-0238-3690
1A23-0609-4130-2329-5593-5777
1A42-0009-9130-2363-3179-8249
1A43-0809-4030-2482-2703-8219
1A44-0009-4130-2397-9758-8478
1A45-0609-4030-2363-2312-5934
1A47-0609-4030-2414-4913-1506
1A4A-0809-9130-2380-1224-9031

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 01/02/2001 15:10:18
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b
(Nero Express)
Recorder: <TEAC DV-W24EW> Version: C.0D - HA 1 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 1
Drive buffer : 2193kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <TEAC DV-W24EW >Version: C.0D - HA 1 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : TOSHIBA MK8025GAS atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TEAC DV-W24EW atapi Port 1 ID 0 DMA: Off

=== CDRom-Device-Map ===
TEAC DV-W24EW D: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 57671680 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 382MB (392172kB)
Free physical memory: 67MB (69540kB)
Memory in use : 82 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

15.12.2005
ISO compilation
13:07:22 #1 Text 0 File Isodoc.cpp, Line 6356
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

13:07:22 #2 Text 0 File Reader.cpp, Line 127
Reader running

13:07:22 #3 Text 0 File Writer.cpp, Line 122
Writer TEAC DV-W24EW running

13:07:22 #4 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

13:07:22 #5 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media

13:08:21 #6 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2101135 (466:55.10, 4103MB)

13:08:21 #7 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)

13:08:21 #8 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: TEAC DV-W24EW, Media type: DVD+R
Disc Manufacturer ID: Plasmon1, Media Type ID: C01, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3

13:08:21 #9 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert the disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW; DVD-R/RW.)

13:08:21 #10 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2101136 (2101136) = #2101136/466:55.11
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2101136 blocks [TEAC DV-W24EW]
--------------------------------------------------------------

13:08:29 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [TEAC DV-W24EW] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4303126528, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2101136 | lead-out | 1 | 0x41 | 0x00

13:08:29 #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

13:08:29 #13 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.

13:08:29 #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

13:08:29 #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5 540 KB/s)

13:08:29 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

13:08:29 #17 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: Plasmon1
Media type ID: C01
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 50 6C 61 73 6D - 6F 6E 31 43 30 31 00 38 ...Plasmon1C01.8
23 54 37 15 02 52 6C 02 - B4 63 15 15 0B 0A 08 08 #T7..Rl..c......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................

13:08:29 #18 Text 0 File DVDPlusRW.cpp, Line 665
Start write address at LBA 0
DVD high compatibility mode: No

13:09:08 #19 SCSI -1106 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x034A0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x73 0x03

13:09:08 #20 CDR -1106 File Writer.cpp, Line 311
Power calibration error

13:09:08 #21 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

13:09:08 #22 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

13:09:08 #23 SCSI -1046 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x5B 0x01 0x01 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05

13:09:08 #24 SCSI -1046 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x5B 0x01 0x06 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05

13:09:08 #25 CDR -1046 File WriterStatus.cpp, Line 167
Illegal disc
TEAC DV-W24EW\H1 T0

13:09:08 #26 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once

13:09:08 #27 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (5 540 KB/s)


Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.57a, size=17168 bytes, created 30/07/2003 01:02:00 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03/08/2004 21:59:44 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

mon graveur est encore plus ancien c'est le nec 1300a

quand je mets un dvd-r verbatim 8x certified .. ben le con il ne grave rien
il me met une erreur machin  

par contre avec des verbatim dvd-r cetified 4x et bien il fait la gravure sans probleme

BONJOUR,
je n'y connais rien en info, mais j'ai le meme probleme avec mon graveur, j'ai changé de marque de dvd, je grave avec record now, nero, clone dvd rien ne marque il me marque erreur puissance calibrage !!!! j'avais donc abandonné et je ne gravé que de cd mais depuis hier il ne veut meme plus graver les cd il me marque "zone de calibrage pleine" j'en ai marre !!!!! avait vous une idée sur le problème !!!!!
merci par avance pour vos conseils

je sui nouveau g besoin d'aide. je vien davoir un graveur nec dvd+rw nd-2100 adil est bien reconnu par xp mai il ne li pa les dvd gravés et il reconnai pa les dvd vierge....