Conseil timing memoire sur striker II formula

voila les derniers qui ont tenue 1/2h et BANNNG blue screen

Ai Overclock Tunner [Manual]
CPU Ratio Setting [09.0]
FSB Frequency [410]
PCIE Frequency [103]
FSB Strap to North Bridge [400 MHz]
DRAM Frequency [DDR2-821MHz]
DRAM Timing Control [Manual]
CAS# Latency [4 DRAM Clocks]
DRAM RAS# to CAS# Delay [4 DRAM Clocks]
DRAM RAS# Precharge [4 DRAM Clocks]
DRAM RAS# Activate to Precharge [12 DRAM Clocks]
[...]
DRAM Static Read Control [Disabled]
DRAM Read Training [Disabled]
MEM. OC Charge [Enabled]
Ai Clock Twister [Strong]
Ai Transaction Booster [Auto]
CPU Voltage [1.35000]
CPU PLL Voltage [1.50]
FSB Termination Voltage [1.20]
DRAM Voltage [2.10]
NB Voltage [1.20]
PCIE SATA Voltage [1.50]
Load-Line Calibration [Enabled]
CPU GTL Reference [Auto]
CPU Spread Spectrum [Disabled]
PCIE Spread Spectrum [Disabled]
CPU Clock Skew [Auto]
NB Clock Skew [Auto]
CPU Margin Enhancement [Optimized]
{Advanced}>CPU Configuration
CPU Ratio Setting [09.0]
C1E Support [Disabled]
Intel (R) Virtualization Tech [Disabled]
CPU TM Function [Enabled]
Execute Disable Bit [Enabled]

Q6600@3.67Ghz
CG via Rivatuner : 700 / 1000